Reveal Urinary Tract Infection Test - Buy 2, GET 1 Free

Description

Contents: Foil pouch with color test chart Three (3) Reveal UTI Test Strips Instructions for use Other Necessary Items: Digital timer or anyalog watch with second hand Pen, pencil and pad, or other means of note taking Abosrbent material such as paper towel Testing Procedure: Step 1 - Prepare to Test Before testing, thoroughly wash the genital area with soap and water, then rinse. Step 2 - Remove Strip Remove test strip from foil pouch. Set pouch aside for use in interpreting results. Step 3 - Begin Test Grasp the handle end of the test strip and begin urinating. After 1 to 2 seconds, hold the pad end of strip in the urine stream for 1 to 2 seconds, gettin gthe test pads completely wet. The test can also be performed by urinating into a clean, dry cup and completely immersing the test strip pads in the urine for 1-2 seconds. When removing the strip from the container, lightly rub the test pads against the edge to remove any excess urine. Step 4 - Lay Strip Upward To ensure excess urine is removed, bring the pads of the test strip into contact with absorbent material (such as a paper towel), and lay the strip facing upward to begin timing. Step 5 - Read Results After 1 minute you will see the results for Nitrite. Results for Leukocytes can be read after 2 minutes. When the proper time has elapsed, compare the test pads to the color block illustrations on the front of the foil pouch. Hold the test pad next to the color blocks to ensure a good compairson. Warning: After three minutes any subsequent color change on the test pads should be ignored. Step 6 - Record Results Record the test results.